We have produced both semi-finished and finished hardware depending on the requirements of the hardware.
The oil and gas industry demands the ability to machine hardware beginning in size from 8.00” OD x 168.00” OAL, in materials including Inconel® 925, Incoloy® 825, P-550 and titanium 6AL-4V.
The Fracking Industry requires hardware to be machined in size from 3-1/2” OD to 5-1/2” OD and lengths from 188.00” OAL to 228.00” OAL. This hardware requires the following typical finished conditions:
ID sizes ranging from .750” to 1.000” ID with a hole size tolerance of +/-.015 uniform bore through the entire length of the part |
Surface finishes better than 125 RMS through the OAL |
ID/OD wall variance that cannot exceed .030” over the entire length |
Material that we typically machine for this industry include alloy steel 1045 and stainless steel 17-4 PH |